Bud,, 

We have a slight problem with the main bulkhead, which leads to the forward heads.Since we put the boat in the water, 2014 sailed her a bit up to the Gulf of California from Puerto Vallarta, we have noticed that the door to the heads does not close.

A rough measurement recently, and it was approximately 5mm. Should there be a strengthening "brace", to keep the bulhead apart. Ours has nothing but plywood that doesnt actually join to the bulkhead pieces.

We are in Guaymas Marina , at the moment,  and are a bit concerned  that when we tighten up the rigging,  the 5mm will increase.

I would appreciate your thoughts on this matter

Regards

Ivan 

SV Chantey